The cabinet base is very important with respect to the cabinet itself. The cabinet base includes two horizontal vertical plates, two vertical vertical plates, and four base connecting angles. The horizontal vertical plates and the vertical vertical plates are respectively connected with the base connecting angles through rivet nuts to form a closed figure, and the base connecting angle is a hollow The height of the cuboid is the same as the height of the horizontal and vertical boards. The upper and lower ends of the connecting corners are respectively provided with a lifting screw hole and an elliptical screw hole. The connecting angle of the base is connected with the horizontal and vertical boards. One end of each is provided with an engagement hole; the horizontal vertical plate and the vertical vertical plate are shaped as a rectangular groove and the two ends are respectively provided with an engagement hole; the upper and lower outer surfaces of the vertical vertical plate are respectively provided with device holes. Because the profile used in the base is hollow, the base is light in weight, and is equipped with a base connection angle and a removable plastic cover plate lunch device and disassembly. It has the advantages of simple structure, low processing cost, and convenient transportation.
Applicability of the base of the cabinet: From the appearance, it is more beautiful and fashionable. From the perspective of use, the Ningbo Latitude cabinet is more complicated because of the wiring inside the cabinet, which is convenient for routing to sort out some spare or extra cables. It can also play a good heat dissipation effect. From the maintenance point of view, it can raise the cabinet to prevent the internal components of the cabinet from getting wet, and at the same time prevent the internal components of the cabinet from being damaged, especially if there is frequent water on site, you can avoid water from the cabinet Enter at the bottom.